HAWK Pyrolysis and TOC Instrument

Watch your data like a HAWK

Re-think your Pyrolysis

Features

Features

The HAWK Instrument is a full workstation including the computer, printer, power accessories and leak detector.

  • Pyrolysis and TOC parameters
  • Multi-ramp/zones and multi-peaks (including our predefined HAWK-PAM™)
  • 126 sample capacity
  • No loss of light oil
  • Precise Temperature
  • Multi-point calibration
  • True temperature for kinetics
  • HAWK-Eye software

Measurements

Key Measurements

Plus the following interpretative calculations:

  • Adsorption Index (AI)
  • Oil Saturation Index(OSI)
  • Hydrogen index (HI)
  • Oxygen index (OI)
  • Production index (PI)
  • Generative Organic carbon (GOC)
  • non-generative organic carbon (NGOC)

Learn more about these measurements and calculations here.

Applications

Applications

  • Evaluation of both conventional and unconventional petroleum resources
  • Identify unconventional hydrocarbon resources such as shale oil, tight oil, low resistivity, by-passed, and conventional payzones
  • Determine classical geochemical parameters for source, maturity and kerogen type

The HAWK Instrument will provide you with the basic data for formulation of geochemical logs that is needed to classify the type of reservoir rock that your drill bit encounters.

Application of data from HAWK leads to the successful identification of producible Shale Oil Resource Systems.

  • Continuous organic-rich mudstones with no open fractures (tight shale)
  • Organic-rich mudstones with open fractures (fractured shale)
  • Organic-rich mudstones with interbedded organic-lean facies (hybrid shale)

Key to producible shale oil resource systems and identification of by-passed pay zones is the presence of producible oil which occurs when the “oil crossover effect” is plotted as shown below:

Utilizing the “Oil Crossover Effect”:

S1/TOC > 1 or when Oil Saturation Index (S1/TOCx100) > 100 mg oil/g TOC

Details

It's all in the details

The HAWK instrument measures all the classical pyrolysis parameters (S1, S2, S3, and Tmax) and TOC (Total Organic Carbon) using only about 100 milligrams of 60 mesh size ground rock sample. In addition, the HAWK measures inorganic carbon and therefore gives you the carbonate carbon content of your rock samples. Acid preparation of samples for TOC analysis on the HAWK is not required.

Utilizing the HAWK-eye software, interpretive results such as Oil Saturation, Hydrogen Index and Maturity can be obtained in near real-time to facilitate geosteering.

HAWK is ideal for analysis of not only conventional samples but also unconventional ones for which, the rock formation’s generative and non-generative organic carbon contents can be determined while any generated, expelled or retained hydrocarbons can be quantified.

The HAWK’s maximum oven temperature is 850 °C which insures complete pyrolysis of difficult to break-down Type III kerogen and also assures you that the complete decomposition of carbonates such as calcite and dolomite will occur. The HAWK also provides the capability for processing kinetics data using software such as GeoIsochem’s Kinetics05. HAWK’s kinetics data output can be configured to suit your needs. Whenever desired, analyses on the HAWK can continue overnight with no operator attention because it has a fully electronic, high precision autoloader with removable and interchangeable trays holding up to 126 samples.

HAWK's PyroSmart panel displays real-time instrument status without the need of an external PC. All the critical parameters including gas flows are stored within the sample file so when you review your data, you can go into the data base and look into both the instrument and sample run parameters. HAWK’s data file captures all real-time data associated with individual runs.

Using the HAWK, you can determine producible and by-passed oil zones (S1) and ascertain the hydrocarbons source rock potential (S2), maturity(Tmax), inorganic carbon content (CC) and Total Organic Carbon (TOC). In addition,you can use the HAWK for designation of formation tops and geosteering while drilling.

The HAWK instrument was designed with laboratory and well-site in mind.

Options

There are various options available on the HAWK Instrument. All HAWK workstations includes computer, printer and basic consumables components.

Pyrolysis

Includes: S1, S2, and Tmax


Pyrolosis TOC/CC

Includes: S1, S2, S3, Tmax, Total Organic Carbon, and Carbonate Carbon (CC)

Contact us for more information and a quote

HAWK-Eye Software

HAWK-Eye Software

HAWK-Eye software

This software package provides both a table and graphical set of analytical results showing the pyrolysis, TOC and carbonate carbon parameters with precise temperature values obtained from kinetic analysis. The software also provides interpretive parameters including hydrogen index (HI), oxygen index (OI), adsorption index, (AI) oil saturation index (OSI), production index (PI), generative organic carbon (GOC) and non-generative organic carbon (NGOC). The software has built-in methods for pyrolysis, TOC and carbonate carbon analysis that can be customized as needed. Calibration is another unique feature of the HAWK-Eye software.

HAWK-Eye software enables you to monitor analyses in real-time and even to view these analyses and output reports in multiple windows simultaneously.

HAWK-Eye software is unique in that it records into a database every analysis that is done on the HAWK instrument and so results are always available whenever needed and output reports into rich excel format.

Maintenance

Included with every HAWK instrument is a 1 year warranty. After that, we recommend purchasing an annual service contract. Both provide service when required as a result of normal use and operation, it includes all covered replacement parts, HAWK-Eye software updates and Service Engineer's time.

Regular maintenance is required to keep your equipment running optimally and ensure the quality of your results. All recommendations below will vary depending on types of rock samples and analysis methods used.

Monthly

Quarterly

Annually

  • Replace Water trap consumables
  • Check O-rings
  • Replace Filters
  • Cleaning split line and oven
  • Cleaning FID
  • Check crucibles and screens
  • Clean and Calibrate CO detector

We strive to provide the best customer service and user experience in the industry. Most requests will be handled within 24 hours - via phone, email or internet. We also provide an online Support Center for customers that includes documentation, FAQs and more.

delivering the most accurate and well supported pyrolysis instruments

Download Our Brochure

HAWK Pyrolysis and TOC instrument brochure - HAWK-Eye software - Service

Frequently Asked Questions about Pyrolysis

HAWK pyrolysis crucible Pyrolysis Questions